We are open 7 days a week.  9am to 5pm Monday to Friday and 10am until 3pm weekends.

Covid restrictions remain in our shop to protect you and our staff, thank you.

Welcome to our new website, its far from finished but we are working hard, please bear with us.

Solvent Weld Glue Wet R Dry Fast Cure

Description

Plastic Pipe Cement 725 Wet R Dry is suitable for use on PVC Pressure systems, may also be used on PVC and ABS.

Grouped product items
Product Name Quantity
Solvent Weld Glue Wet R Dry Fast Cure 240 ml(PW0266)
£12.95
- +
Solvent Weld Glue Wet R Dry Fast Cure 500 ml(PW0267)
£22.95
- +
In stock

Plastic Pipe Cement 725 Wet R Dry is suitable for use on PVC Pressure systems, may also be used on PVC and ABS.

  • Cut pipe square, remove all burrs, dirt, grease and moisture. Clean surfaces with plastic pipe cleaner below.
  • IMPORTANT: Check dry fit. A tight interference fit is essential if quick pressurisation is required.
  • Working quickly, apply a full, even coat of cement to pipe, then a thin, even coat to inside of fitting.
  • Avoid excessive use of cement resulting in puddling.
  • While cement is wet, immediately push pipe and fitting together.
  • Hold joint for at least 30 seconds to avoid pushout.
  • Allow a few minutes beforeapplying pressure.
  • Full joint strength will be reached in 4 hours.
  • For temperatures below 5°C. allow a longer cure time.

Replace lid after use, store between 5°C and 20°C, use within 3 years of date on base of can, contents 240 ml.

Very fast cure, use in wet or dry conditions. PVC cement for all classes and schedules of rigid and flexible pipe

Specially formulated for applications where conditions are very wet or when quick pressurisation is desired. Comes complete with brush attached to inside lid of can.

weldon725_1_ (188.80 kB)