Pipework & Fittings >> Valves

You won't find a better selection than what we have on offer here, these Double Union Ball valves are ideal to restrict pipe flows, as purge valves and waste control valves. Easy to dismantle and maintain and very strong - fits standard imperial PVC pressure pipe.  Will fit solvent waste with suitable reducing sleeves shown below.

All the ball valves shown on this page are manufactured to the 'Highest' Standards and are suitable for the most complex of systems - they are totally reliable, which is important, and have good ease of use. 

One of the most useful ways of controlling your water flow's, also enables you to isolate pumps etc for removal .Use one each side of the Pump in question.

These Reducing Sleeves, or inserts as many people call them, are to reduce the internal sizes of a particular pipe to enable a slightly smaller pipe to fit the connection, whether that connection is to a socket, bend or some other fitting - they should, of course, be solvent welded into place prior to the actual pipe connection being made.  

Reducing sleeves enable the use of ball valves, slide valves and other fittings with solvent weld waste piping as well as PVC pressure pipe. Simply glue over the end of the solvent weld pipe before fitting to the appropriate valve or fitting.  One required for each side of the valve.  

The Valterra Slide Valves are without doubt one of the finest on the world market. They come complete With the renowned full Stainless Steel Shutter plate.

The Valterra Slide Valves  are made out of High Quality PVC and available in 1.5" - 2" - 3" and 4".

One more thing, the Valterra Slide Valves were made to last, extremely robust, and worth the extra investment.

Manufactured to accommodate pvc pressure pipe these may be modified to fit waste pipe by using the reducing sleeves shown above.

These Valterra Slide Valves are mainly used for on/off waste valves in filters and to separate the filter from pond, to completely shut off flow when required.